A complete process test of mullite sagger powder granulation for isostatic pressing has been successfully completed for an Indian refractory & ceramic customer. The customer selected the AKW 5L laboratory mixer granulator for formulation trial. The AKW integrated machine finishes mixing and granulation in one single step and produces consistent 1–2 mm granules. Highly satisfied with the granulation performance, the customer placed a formal order for the AKW 100L production mixer granulator for mass mullite sagger manufacturing.
Mullite sagger is a core kiln furniture widely adopted for high-temperature sintering and lithium battery cathode firing. Isostatic pressing demands outstanding powder flowability and tight particle size consistency. Fine mullite powder easily segregates, bridges and fills moulds unevenly, which often leads to green body density deviation, lamination and cracking. Powder granulation is an essential pre-treatment process for premium mullite sagger production.
Traditional production separates mixing and granulation into two independent procedures, resulting in long process cycles, poor particle consistency and re-segregation during material transfer. With AKW intensive granulation technology, homogenization and granulation are completed inside one chamber. Secondary segregation caused by material transfer is avoided. The finished 1–2mm granules deliver improved flowability and uniform mould filling, stabilizing green body quality for cold isostatic pressing and lowering firing rejection rate.
The AKW 5L small lab mixer granulator is specially designed for refractory materials, advanced ceramics and new sagger material R&D. It consumes a small quantity of raw materials and enables flexible adjustment of binder dosage, rotating speed and granulation duration. Engineers can quickly define the optimal granulation window and shorten the development cycle of new mullite sagger recipes.
After side-by-side evaluation, the customer confirmed that the AKW one-step granulation solution outperforms traditional processes on powder flow and mould filling. Based on reliable lab test data, the customer upgraded to the AKW 100L industrial model for their mullite sagger production line in India.
AKW mixer granulator series serves mullite sagger, corundum sagger, MgO-C refractory, Al-C nozzle and other advanced ceramic powder. It supports both solvent resin system and water-based formulation, covering lab R&D and bulk production for isostatic pressing and dry pressing. Key advantages:
The refractory and lithium kiln furniture industry in India is expanding rapidly. More sagger manufacturers are upgrading to isostatic pressing and looking for dependable granulation equipment. This order marks another successful mullite sagger granulation project delivered by AKW in South Asia. AKW provides equipment supply, process guidance and granulation parameter commissioning for global partners.
From AKW 5L R&D trial to AKW 100L mass production, the integrated mixer granulation solution solves the powder pre-treatment bottleneck for isostatic pressed mullite saggers. Refractory and kiln furniture manufacturers worldwide are welcome for powder testing and technical consultation.
A: Yes. By adjusting rotating speed, binder dosage and granulation duration, the AKW integrated mixer granulator can consistently produce free-flowing 1–2mm granules, perfectly suited for cold isostatic pressing of mullite saggers.
A: It is not limited to mullite sagger. The AKW 5L lab granulator is designed for R&D trials of mullite, corundum, SiC sagger powder, MgO-C refractory, Al-C refractory and other advanced ceramic powders. Both water-based and resin solvent systems are supported with low raw material consumption.
A: AKW intensive mixer granulator completes mixing and granulation in one single chamber in one step. No intermediate material transfer, which greatly reduces powder segregation for isostatic pressing grade sagger powder.
A: Fine mullite powder has poor flowability and tends to bridge and segregate. Direct pressing causes uneven green density, lamination and high rejection rate. Granulation improves flow and mould filling consistency, which is essential for high-quality isostatic mullite sagger production.
A: Yes. AKW series share consistent scale-up principle. The formulation, binder ratio and process window validated on 5L lab machine can be transferred to the 100L production unit. We supply process calibration and commissioning support.
A: AKW granulator works for corundum sagger, SiC sagger, MgO-C brick, Al-C continuous casting components, spinel refractory powder, for both dry pressing and isostatic pressing.
A: Yes. AKW provides full package service including equipment delivery, granulation training, parameter tuning and startup guidance for overseas customers.